Toyota Land Cruiser 100 / Amazon, Lexus LX 470

Since 1997 of release

Repair and car operation

Removal and installation of a latch of the lock of a cowl and cable of its drive

Models of cars considered in the present Management are equipped by system of additional safety (SRS). Before to start performance of any works near to the block of a pillow of safety, a steering column or the instrument panel, disconnect SRS in order to avoid reception of traumas at its casual operation (the Onboard electric equipment see). Electroconducting of chain SRS is easy for distinguishing on yellow colour of isolation.

PERFORMANCE ORDER

1. Remove a decorative lattice of a radiator (see Has undressed Removal and installation of a decorative lattice of a radiator).

2. Lead round assemblage of a latch by a marker or чертилкой for the purpose of a guarantee of correctness of its installation at assemblage. Turn out fixing bolts (address to an illustration) and remove a latch from a basic beam of a radiator.

3. Having wrung out a latch, disconnect from it приводной a cable.
4. Installation is made upside-down. For lock adjustment release fixing bolts and in appropriate way correct latch position. Track reliability of a tightening of fixture.
5. For replacement приводного a cable "walk" on it from a latch to a partition of an impellent compartment, liberating from all provided intermediate clamps and directing arms.

6. Pass in salon and remove the left section of the bottom furnish of the panel of devices (see Has undressed Removal and installation finishing and main sections of the panel of devices). Separate the lever отпускания the lock of a cowl from the panel of devices (address to an accompanying illustration).

7. Separate from the lever a tip приводного a cable.
8. Tie up by the end of a cable a piece of a string and involve assemblage in an impellent compartment.
9. Untie a cable from the left string passed through a partition.
10. Installation is made upside-down.