Toyota Land Cruiser 100 / Amazon, Lexus LX 470

Since 1997 of release

Repair and car operation



Tojota Lend Kruzer, Amazon, Leksus LX470
+ Identification numbers of the car
+ Controls and receptions of safe operation of the car
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ The power supply system and release of the fulfilled gases
+ Engine electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
- Gear change box
   + Automatic transmission (АТ)
   + Distributing box
+ Transmissionnaja line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


клуб вулкан играть онлайн



Gear change box

Specifications

The general parametres

The characteristic

Value

Type

4 or 5-stupechataja, A343F, A440F

Type and volume ATF

See the Head of Adjustment and car routine maintenance

Distance from an end face of the hydrotransformer to a cut of a bell of transmission, mm

Not less than 17.1

Efforts of a tightening of carving connections, Nanometer

Connection type

Value

The gauge of temperature ATF

15

Lock ring to the valve case

10

Drain stopper ATF

20

Bolts of fastening of the pallet to case AT

74

Bolt of fastening of the gauge-switch of the permission of start

13

The gauge-switch of the permission of start to control lever АТ

13

Nut of the gauge-switch of the permission of start

4

Gauge VSS basis to case AT

16

Gauge VSS case to case AT

5.4

Bolts of fastening АТ to the engine

72

Fixture of tubes маслоохладителя to case AT

32

Arm of a latch of position P to case AT

7.4

The case of the electromagnetic valve

11

Nut of fastening of draught of switching to the selector lever

13

Bolts of fastening of the case клапанной assemblages

10

Distributing box. Type HF2A (V)

Efforts of a tightening of carving connections, Nanometer

Connection type

Value

Nuts of connecting flanges (forward and back)

106

Bolts of fastening of a protective casing of a distributing box to a cross-section beam

28

Bolts of fastening of a distributing box to АТ

69

Bolts of fastening of a cross-section beam

50

Nuts of fastening of a cross-section beam

74

Jellied and drain stoppers

37

Fixture of the forward and back case and their covers

37

The back case to fastening

39

Clamp of a control lever a distributing box

12

The actuation mechanism electromotor to the forward case

18

Carving stopper to the forward case

19

Carving stopper to the back case

29

Privodnaja gear wheel of the gauge of speed (VSS)

11

Gauges of modes of a distributing box

37

Knot of a rod of management to the lever

14

Grid маслозаборника to the back case

4.9

Маслозаборник to the forward case

12

Plate of the basis of the oil pump

43

Cover of the oil pump

4.9