Tojota Lend Kruzer, Amazon, Leksus LX470
+ Identification numbers of the car
+ Controls and receptions of safe operation of the car
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ The power supply system and release of the fulfilled gases
+ Engine electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
- Gear change box
- Automatic transmission (АТ)
Problem diagnostics АТ - the general information
Adjustment of draught of a gear change
Check, adjustment and replacement of the gauge-switch of the permission of start
Removal and installation of assemblage of the lever of selector AT
Removal and installation of automatic transmission
+ Distributing box
+ Transmissionnaja line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Removal and installation of assemblage of the lever of selector AT
|
|
1. Remove the top panel of the back console (the Body see the Head).
2. Remove handles of switches and dismantle the control panel of heating of seats (see the Head of System of cooling of the engine, salon and air conditioning heating).
3. Remove the handle of the lever of switching of modes of a distributing box.
4. Поддомкратьте the car also establish it on props.
5. Remove a clamp, give a nut of fastening of draught of a gear change to the selector lever, do not forget to remove a washer.
6. Disconnect electroconducting and turn out bolts of fastening of the basis of assemblage of the lever of the selector of transfers.
7. Installation is made upside-down. Track, that all fixture has been tightened with demanded effort. |
|
|
|