Toyota Land Cruiser 100 / Amazon, Lexus LX 470

Since 1997 of release

Repair and car operation


Tojota Lend Kruzer, Amazon, Leksus LX470
+ Identification numbers of the car
+ Controls and receptions of safe operation of the car
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ The power supply system and release of the fulfilled gases
+ Engine electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ Gear change box
+ Transmissionnaja line
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Search of causes of failures of an electric equipment
   Safety locks - the general information
   Fusible inserts - the general information
   Chain breakers - the general information
   The relay - the general information and check of serviceability of functioning
   The digital tyre of given CAN
   Check of serviceability of functioning and replacement of the breaker of indexes of turns/alarm systems and the switch of last
   Replacement of the switch of indexes of turn/switch of modes of functioning of external lighting devices
   Replacement of the switch of ignition and the lock of blocking of a steering column
   Check of serviceability of functioning and replacement of the switch of modes of functioning of cleaners of a windscreen
   Replacement of lamps of head headlights
   Adjustment of a direction of optical axes of head headlights
   Removal and installation of block headlights
   Replacement of lamps
   Removal and installation of an audiosystem and it динамиков
   Removal and installation of the aerial of a radio receiver
   Check of serviceability of functioning, replacement of the electromotor of a drive of screen wipers and the pump of washers
   Check of serviceability of functioning and replacement of the switch of heating of back glass
   Check of serviceability of functioning and regenerative repair of a heater of back glass
   Removal and installation of a combination of devices
   Check of serviceability of functioning and replacement of small horns of a horn
   The electric drive of external rear-view mirrors - the general data and check of serviceability of functioning
   Control system of speed (темпостат) - the general data, check of serviceability of functioning of components
   The electric drive стеклоподъемников - the general data and check of serviceability of functioning
   The uniform lock and remote control system door activators - the general data and check of serviceability of functioning
   Running fires of light time of days (DRL)
   Safety pillows - the general information
   + Schemes of electric connections - the general information




Replacement of lamps

Flasks of lamps remain hot within nearby 20 minutes after switching-off of lighting devices. Before to start to work make sure that components have definitively cooled down.


 PERFORMANCE ORDER

Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!

Forward dimensional fires and indexes of turns

 PERFORMANCE ORDER

1. Turn out the top screw of fastening of assemblage of forward dimensional fire (address to an accompanying illustration).
2. Remove assemblage of dimensional fire and disconnect from it electroconducting.
3. Having turned a lamp cartridge counter-clockwise, take it from a casing of lantern assemblage.
4. For extraction of a lamp from a cartridge pull it in parallel an assemblage axis.
5. Installation is made upside-down.

The back combined lanterns

 PERFORMANCE ORDER

1. Remove a lens of lantern assemblage (address to an accompanying illustration).
2. For replacement of a lamp of the index of turn or a stoplight simply turn it counter-clockwise and take from ламподержателя.

On some models of a lamp are taken from the back party of lantern assemblage for what last is necessary for dismantling.

3. For the purpose of providing of access to a lamp of fire of a backing remove a plastic cover (address to an accompanying illustration).
4. For removal of the combined lantern in gathering disconnect from it electroconducting (address to an accompanying illustration).
5. Installation is made upside-down.

Licence plate illumination

 PERFORMANCE ORDER

1. At will поддомкратьте a back of the car also establish it on props. Find a lantern of illumination of licence plate from the back party бамперной assemblages, in case of need take advantage of a pocket small lamp.
2. For cartridge extraction turn it counter-clockwise and pull outside from a lantern casing. On models 4Runner turn out screws of fastening of a lens of a lantern.
3. For lamp extraction pull it strictly in parallel a cartridge axis.
4. Installation is made upside-down.

Illumination of the control panel by functioning of systems of heating/air conditioning

 PERFORMANCE ORDER

1. Remove corresponding section of furnish of the panel of devices (the Body see the Head).
2. Having pulled, liberate from the cartridge the failed lamp.
3. Installation is made upside-down.

Illumination of the panel of devices

Watch, that replaceable lamps corresponded on the performance data (power consumption) failed. Remember that lamps of illumination of measuring instruments have higher capacity, than display lamps.


 PERFORMANCE ORDER

1. Remove a combination of devices (see Has undressed Removal and installation of a combination of devices).
2. Turn assemblage of a lamp with a cartridge counter-clockwise and take it from assemblage of a combination of devices.
3. Having pulled a lamp outside, take it from a cartridge.
4. Installation is made upside-down.