Toyota Land Cruiser 100 / Amazon, Lexus LX 470

Since 1997 of release

Repair and car operation


Tojota Lend Kruzer, Amazon, Leksus LX470
+ Identification numbers of the car
+ Controls and receptions of safe operation of the car
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ The power supply system and release of the fulfilled gases
+ Engine electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ Gear change box
+ Transmissionnaja line
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and the car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and carpet coverings of salon
   Repair of insignificant damages кузовных panels
   Repair seriously damaged кузовных panels
   Service of loops and car locks
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of position of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of a decorative lattice of a radiator
   Removal and installation of forward and back bumpers
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of external rear-view mirrors
   Removal, installation and adjustment of doors
   Removal and installation of forward wings
   Removal, installation and adjustment of a door of a back
   Removal and installation has flown down also a regulator стеклоподъемника back doors
   Removal and installation of door glasses
   Removal and installation of regulators стеклоподъемников
   Removal and installation of latches, замковых cylinders and door handles
   Removal and installation of a cover of the top hatch from a drive
   Removal and installation of a casing of a steering column
   Removal and installation of the central console
   Removal and installation finishing and main sections of the panel of devices
   Removal and installation of a lattice of an air inlet forward обтекателя
   Removal and installation of seats
   Removal and installation of an internal rear-view mirror
+ Onboard electric equipment





Removal and installation has flown down also a regulator стеклоподъемника back doors

Design of a door of a back

1 — the Regulator стеклоподъемника
2 — Right directing стеклоподъемника
3 — a door Emphasis
4 — Back glass
5 — Left directing стеклоподъемника
6 — the door Lock
7 — the Directing tape of facing of a window aperture
8 — the External sealing tape

9 — the Cover of a service aperture
10 — the Plate
11 — the Cranked lever of a drive of a latch
12 — the lock Cylinder
13 — the Internal sealing tape
14 — the Facing panel of licence plate
15 — the Panel of an upholstery of a door of a back


 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!

2. At will the back door can be removed from the car (see Has undressed Removal, installation and adjustment of a door of a back).
3. Remove loopy поручневую the handle of a door of a back, Having removed its panel and having turned out a fastening bolt.
4. Release ten clamps of fastening of the panel of an internal upholstery of a door. Disconnect electroconducting and turn out screws of fastening of a cover of a service aperture (address to an illustration above).
5. Remove directing tape of facing of a window doorway of a back.
6. Disconnect the remained electroconducting, take out glass and remove regulator assemblage стеклоподъемника (address to an accompanying illustration).
7. Installation is made upside-down.