Toyota Land Cruiser 100 / Amazon, Lexus LX 470

Since 1997 of release

Repair and car operation

Removal and installation of regulators стеклоподъемников

In order to avoid reception of cuts of hands about edges of technological windows in a doorframe work in gloves!

PERFORMANCE ORDER

1. On the models equipped электроприводными стеклоподъемниками and the uniform lock, disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped by a security code before to disconnect the battery make sure that have a correct combination for audiosystem input in action!

2. Remove the panel of an internal upholstery of a door and film влагозащитный the screen (see Has undressed Removal and installation of panels of an internal upholstery of doors).
3. Remove a windowpane (see Has undressed Removal and installation of door glasses).

4a. On models with a manual drive стеклоподъемников...

4b.... Turn out five fixing bolts (address to accompanying illustrations).

4c. For removal электроприводного a regulator disconnect electroconducting and turn out six fixing bolts (address to an accompanying illustration) (except a regulator стеклоподъемника a back door).

5. For removal электроприводного a regulator стеклоподъемника a back door remove a latch of the lock and the external handle of a door (see Has undressed Removal and installation of latches, замковых cylinders and door handles), then disconnect corresponding electroconducting and turn out four fixing bolts (address to an accompanying illustration). Take assemblage of a regulator from a doorframe.

6. Installation is made upside-down. Do not forget to grease rollers of regulators with universal greasing. Track reliability of a tightening and защелкивания fixture.