Toyota Land Cruiser 100 / Amazon, Lexus LX 470

Since 1997 of release

Repair and car operation



Tojota Lend Kruzer, Amazon, Leksus LX470
+ Identification numbers of the car
+ Controls and receptions of safe operation of the car
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ The power supply system and release of the fulfilled gases
+ Engine electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ Gear change box
+ Transmissionnaja line
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and the car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and carpet coverings of salon
   Repair of insignificant damages кузовных panels
   Repair seriously damaged кузовных panels
   Service of loops and car locks
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of position of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of a decorative lattice of a radiator
   Removal and installation of forward and back bumpers
   Removal and installation of panels of an internal upholstery of doors
   Removal and installation of external rear-view mirrors
   Removal, installation and adjustment of doors
   Removal and installation of forward wings
   Removal, installation and adjustment of a door of a back
   Removal and installation has flown down also a regulator стеклоподъемника back doors
   Removal and installation of door glasses
   Removal and installation of regulators стеклоподъемников
   Removal and installation of latches, замковых cylinders and door handles
   Removal and installation of a cover of the top hatch from a drive
   Removal and installation of a casing of a steering column
   Removal and installation of the central console
   Removal and installation finishing and main sections of the panel of devices
   Removal and installation of a lattice of an air inlet forward обтекателя
   Removal and installation of seats
   Removal and installation of an internal rear-view mirror
+ Onboard electric equipment





Removal and installation of an internal rear-view mirror

Priklennoe mirror

 PERFORMANCE ORDER

1. If in a mirror the illumination lantern is provided, disconnect a wire of weight from the battery.
2. Disconnect from a mirror available conducting.
3. Undertake more reliable for the basis of a mirror and develop it counter-clockwise on a half-turn.
4. Remove a mirror from glass.
5. Installation is made upside-down.

Privernutoe mirror

 PERFORMANCE ORDER

1. Accurately hook an overlay (at a corresponding complete set) flat шпателем.
2. Remove about mirror drains rubber демпфер.
3. Turn out the screw from the basis and remove a mirror.
4. Installation is made upside-down.