Toyota Land Cruiser 100 / Amazon, Lexus LX 470

Since 1997 of release

Repair and car operation

Tojota Lend Kruzer, Amazon, Leksus LX470
+ Identification numbers of the car
+ Controls and receptions of safe operation of the car
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ The power supply system and release of the fulfilled gases
+ Engine electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ Gear change box
- Transmissionnaja line
   Specifications
   Kardannye shaft and hinges - the general information
   Condition check трансмиссионной lines
   Removal and installation карданного a shaft
   Replacement карданных hinges
   Privodnye shaft/semiaxes, - the general information and condition check
   Removal and installation of semiaxes, bearings and epiploons of the back bridge
   Replacement of an epiploon of a leading gear wheel of differential
   Removal and installation of assemblage of the back bridge
   Removal and installation of power shafts
   Replacement of protective covers and service of SHRUS
   Removal and installation of assemblage of forward differential
   Removal and installation of naves from a disconnected drive
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Specifications

The general parametres

The characteristic	Value
The transfer relation of the main transfer of a distributing box (H4/L4)	1.000/2.488
Axial люфт карданного the hinge, mm	0.05
Palpation of a flange of forward differential, mm	0.1
Pretightness of the bearing of a forward nave, Nanometer	28 ч 56
Pretightness of the bearing of a back nave, Nanometer	26 ч 57
Pretightness of a leading gear wheel of forward differential, Nanometer	0.4 ч 0.8
Pretightness of a leading gear wheel of back differential, Nanometer	0.6 ч 1.0
Depth of installation of an epiploon of differential, mm	1
Distance from a cut of the case of a semiaxis to a nut end face, mm	0.2 ч 0.9

Efforts of a tightening of carving connections, Nanometer

Kardannye shaft

Bolts of fastening of the top dustproof cover

The characteristic	Value
Flantsevye bolts/nuts
Forward shaft	74
Back shaft	88
Fixture of dustproof covers of a shaft
The bottom cover
Bolts	17
Nuts	13
The top cover (address to an illustration above)
Bolts A	36
Bolts B	23

Power shafts and semiaxes

The characteristic	Value
Adjusting nut of a pretightness of the bearing of a nave, Nanometer
1st stage	59
2nd stage (after проворачивания naves)	59
3rd stage	To weaken to possibility of rotation by a hand
4th stage	5
Nut of a flange of forward differential	196
Nut of a flange of back differential	245
Effort of a tightening of a nut of a flange of differential for one approach	13
The maximum effort of a tightening of a nut of a flange of forward differential	343
The maximum effort of a tightening of a nut of a flange of back differential	441
Nuts of fastening of forward differential	25 – 27
Bolts of fastening of back differential	73
Bolt of fastening of gauge ABS	18
Collars of fastening of conducting of gauge ABS	8
Wheel nuts	131
Nuts of fastening of the case of a nave	31
Nut of the bearing of a nave	274
Bolts of fastening of a cover of a nave	10
Bolts of fastening of a protective casing to a rotary fist	18
Brake disk to a nave	64
Flexible hose to a support of the brake mechanism	30
The shock-absorber to a frame	25
The shock-absorber to the bottom lever of a suspension bracket	39
Stabilizer arm to a frame	29