Tojota Lend Kruzer, Amazon, Leksus LX470
+ Identification numbers of the car
+ Controls and receptions of safe operation of the car
+ Options and car routine maintenance
+ The engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ The power supply system and release of the fulfilled gases
+ Engine electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ Gear change box
+ Transmissionnaja line
- Brake system
Specifications
System of antiblocking of brakes (ABS) - the general information and codes of malfunctions
Replacement brake колодок
Removal and installation of supports of disk brake mechanisms
Condition check, removal and installation of a brake disk
Removal and installation of the main brake cylinder (ГТЦ)
Check of a condition and replacement of brake lines and hoses
The valve sensitive to loading/perepusknoj (LSP and BP)
Adjustment of a lay brake
Replacement of cables of a drive of a lay brake
Check of serviceability of functioning / of tightness, removal and installation of the amplifier of brakes
Prorolling of brake system
Adjustment of a pedal of a foot brake
Check of serviceability of functioning and replacement of the gauge-switch of stoplights
Gauges and system ABS activator
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Adjustment of a lay brake
|
|
1. Raising and отпускание a lay brake is made by means of the control lever located between forward seats. Built in in mechanisms of a lay brake regulators automatically compensate deterioration of brake boots. Nevertheless, gradual вытягивание приводного a cable in due course leads to necessity of performance of additional adjustments. Full raising of a lay brake on models is made at вытягивании management handles on 6 – 8 clicks of a ratchet.
2. Release the lever of a lay brake.
3. Remove the central console (the Body see the Head).
|
|
4. Counternut rotation (address to an accompanying illustration) make tension adjustment приводного a cable, achieving full raising of a lay brake at вытягивании the lever on demanded quantity of clicks of the ratchet mechanism. |
5. Establish into place the central console (the Body see the Head). |
|
|
|