1. Prop up forward wheels противооткатными boots. Поддомкратьте a back of the car also establish it on props.
2. Prop up assemblage of the back bridge тележечным a jack.
3. Pass a safety chain through coils of a spring and сболтите among themselves its ends, having eliminated thereby risk casual выскакивания springs in the course of lowering of assemblage of the back bridge, track, that the chain had a sufficient stock on length to allow a spring to be straightened completely.
4. Give a bolt of the bottom fastening of the left back shock-absorber (see Has undressed Removal and installation of back shock-absorbers).
5. Disconnect from the back bridge a bar of the stabilizer of cross-section stability (see Has undressed Removal and installation of a bar of the back stabilizer of cross-section stability).
6. Give a bolt of the bottom fastening of the right back shock-absorber (see Has undressed Removal and installation of back shock-absorbers).
7. Disconnect from the back bridge a jet bar (see Has undressed Removal and installation of a jet bar).
8. Slowly lower assemblage of the back bridge, having provided sufficient free space for spring removal, try not to damage brake lines.
9. Installation is made upside-down. Track correctness of landing of an end face of a spring in a saddle. All fixture tighten with demanded effort. |
|