1. Ослабьте wheel nuts. Поддомкратьте the car also establish it on props. Remove forward wheels.
2. Keeping a rod of the shock-absorber from проворачивания a face key give a fixing nut of the top support of assemblage (address to an illustration above).
3. Trying to remember adjusting position of components, remove rubber plugs and washers.
4. Give a nut of a through bolt of fastening of the bottom support of the shock-absorber to the bottom lever of a suspension bracket.
5. Turn away bolts of fastening of the bottom support of the shock-absorber.
6. Lower assemblage downwards and take it through a wheel arch.
7. Check up a condition of rubber plugs of the top support of the shock-absorber, defective components replace.
8. Rock downwards not loaded car from outside the suspicious shock-absorber. The corner of the car with the serviceable shock-absorber after it have released, should return on the place, without making oscillative motions. The tendency to a swing upwards-downwards or inability of the car after pair nods to return to a starting position hints at the faulty shock-absorber.
9. Installation is made upside-down. Track, that all fixture has been tightened with demanded effort. |
|