Toyota Land Cruiser 100 / Amazon, Lexus LX 470

Since 1997 of release

Repair and car operation

Wheels and tyres – the general information

Standard sizes of tyres

Wheels of all models of cars described in the present Management are equipped by radial tyres of the metric size with стеклотканевым or a steel cord (address to an illustration above). Installation on the car of tyres of other standard size can affect its controllability and comfort of a course.

At all do not establish on one axis of the car of the tyre of a various design! It is recommended to make replacement of tyres by both wheels of one axis simultaneously. If replacement only one wheel is made, watch, that the replaceable tyre corresponded on a steam room standard size.

Extremely important from the point of view of controllability of the car to support demanded pressure in tyres. Regularly, at least, once a month, check pressure of a rating of tyres (see the Head of Adjustment and car routine maintenance). Also check pressure before each distant trip.

Disks of wheels are subject to replacement in case of deformation, infringement of density of landing to them бескамерных tyres, strong damage by corrosion, infringement of vertical symmetry, working out to the oval form болтовых apertures, and also in case of constant spontaneous отпускания fixing nuts. It is not recommended to make regenerative repair of the damaged disks with application of welding or клепки.

Deformation of disks is usually connected with arrival on borders during an inaccurate parking of the car. Is inadmissible to continue operation of the car with погнутыми disks – олесо should be repaired in шиномонтажной a workshop. For check of a condition of disks поддомкратьте the car also establish it on props. Visually check up disks on presence of cracks and signs of deformations.

The important factor defining parametres of movement and braking of the car, balancing of wheels in gathering is. Infringement of the given parametre can essentially lower controllability of a vehicle, not to mention appreciable reduction of service life of tyres. Each time after replacement of the tyre a wheel is subject to balancing in conditions шиномонтажной to a workshop.