Toyota Land Cruiser 100 / Amazon, Lexus LX 470

Greasings and the liquids recommended to application by the company-manufacturer of cars at the moment of drawing up of the present Management are more low listed. Fresher information can be received on firm car repair shops of company Toyota.

Impellent oil:

   Type

      Petrol engines

Universal engine oil for petrol engines of class SL or SJ on API

      Diesel engines

Engine oil for diesel engines of class CF–4 (alternative – CE or CD) on API

   Viscosity

See a viscosity card illustrations above

Cooling liquid

(50 – 70) % an antifreeze solution on base этиленгликоля with water

Brake liquid

DOT 3, DOT 4 or SAE J1703

System GUR liquid

ATF DEXRON II or III

Transmissionnaja liquid for АТ

ATF DEXRON II or III

Oil for a distributing box

Transmissionnoe oil viscosity SAE 75W–90 type API GL–4/GL–5

Oil for forward and back differential

Гипоидное трансмиссионное oil viscosity SAE 80W–90 type API GL–5

Greasing for the chassis

   Bearings of wheels and карданные shaft

Litievaja greasing NGLI No 2

   Spherical support and axial loose leaves of a forward power shaft

Litievaja greasing NGLI No 1

Fuel

Controls and operation receptions see the head

Impellent oil

   The engine 2UZ–FE

      Without filter replacement

6.4

      With filter replacement

6.8

   The engine 1HD–FTE

      Without filter replacement

10.1

      With filter replacement

11.4

System of cooling of the engine

   The engine 2UZ–FE

      Without a back heater

14.7

      With a back heater

15.3

   The engine 1HD–FTE

13.3

The transmissionnaja liquid for АТ (to merge and fill)

   Engines 2UZ–FE

1.9

   Engines 1HD–FTE

6.0

Oil for a distributing box (to merge and fill)

   The engine 2UZ–FE

1.4

   The engine 1FZ–FTE

1.6

Back differential (to merge and fill)

   Without differential blocking

      The engine 2UZ–FE

3.3

      The engine 1FZ–FTE

3.2

   With differential blocking

3.2

Forward differential (to merge and fill)

   The engine 2UZ–FE

1.7

   The engine 1HD–FTE

2.8

System GUR liquid

0.8

* All volumes are resulted only approximately. At updating be verified with уровневыми labels.

Type of candles / a candle backlash, mm

   The engine 2UZ–FE

Denso SK20R11 or NGK IFR6A11/1.1

Nominal density of electrolit (at temperature 20 hailstones.), g/sm ³

1.25 ч 1.29

Rated voltage (at temperature 20 hailstones.), in

12.5 ч 12.9

Engines 2UZ–FE

1–8–4–3–6–5–7–2

Engines 1HD–FTE

1–4–2–6–3–5

The engine 2UZ–FE

650 ч 750

The engine 1HD–FTE

   The minimum turns

550 ч 650

   The maximum turns

4300 ч 4500

In case of different interpretations it is necessary to prefer the data from label VECI.

Data on installation of a corner of an advancing of ignition see in Specifications to the Head "an engine Electric equipment".

The engine 2UZ–FE

   Inlet valves

0.15 ч 0.25

   Final valves

0.25 ч 0.35

The engine 1HD–FTE

   Inlet valves

0.17 ч 0.23

   Final valves

0.47 ч 0.53

The minimum admissible thickness of frictional overlays колодок, mm

1

The minimum admissible thickness of a substrate of frictional overlays back колодок, mm

2

Free wheeling, mm

1.0 ч 6.0

The maximum backlash of a pedal by pressing with force 490 Н at the working engine, mm

   WITH ABS

116

   Without ABS

94

At a tightening with force 196 Н

4 ч 6

Maximum admissible люфт a steering wheel, mm

40

The maximum difference of levels of liquid ГУР at the started and stopped engine, mm

5

The engine 1HD–FTE (address to an illustration above)

   1

From 8 to 11

   2

From 15 to 20

On engines 2UZ–FE it is established automatic натяжитель приводных belts

Nuts of fastening of fuel lines to the fuel filter

29

Pallet bolts картера АТ

7.4

Bolts э/м valves AT

10

Filter AT bolts

10

Drain stopper АТ

20

Drain/jellied stopper of a distributing box

37