Toyota Land Cruiser 100 / Amazon, Lexus LX 470

Since 1997 of release

Repair and car operation


Tojota Lend Kruzer, Amazon, Leksus LX470
+ Identification numbers of the car
+ Controls and receptions of safe operation of the car
- Options and car routine maintenance
   Specifications
   The routine maintenance schedule
   The general data on options and adjustments
   Check of levels of liquids
   Check of a condition of tyres and pressure of their rating
   Check of level of working liquid АТ
   Check of level of a liquid of the hydraulic booster of a wheel
   Replacement of impellent oil and the oil filter
   Check, service and accumulator room gymnastics
   Check of a condition of components of system of cooling
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition and replacement of brushes of screen wipers
   Rotation of wheels
   Check of a condition of components of a suspension bracket and steering drive
   Greasing of components of the chassis
   Check of a condition of components of system of release of the fulfilled gases
   Check of level of greasing in a distributing box
   Check of level of greasing of differential
   Check of a condition of seat belts
   Check and adjustment of turns of idling
   Check of a condition of protective covers of power shafts
   Check and replacement of the valve of system of operated ventilation картера (PCV)
   Replacement of a filtering element of an air cleaner
   Condition check, adjustment of effort of a tension and replacement приводных belts
   Check of a condition of components of the power supply system
   Check of brake system
   Adjustment of height of position and free wheeling of a pedal of a brake
   Check of a condition and replacement of spark plugs (petrol engines)
   Check and adjustment of backlashes of valves
   Replacement of the fuel filter
   Check and service of the conditioner of air (К/В)
   Service of system of cooling
   Condition check, stuffing by greasing and adjustment of forward naves and wheel bearings
   Replacement ATF of automatic transmission and the main transfer
   Replacement of greasing of a distributing box
   Replacement of greasing of differential
   Check of a condition of components of system of catching of fuel evaporations
   Check of serviceability of a condition of components of system рециркуляции the fulfilled gases (EGR)
+ The engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ The power supply system and release of the fulfilled gases
+ Engine electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ Gear change box
+ Transmissionnaja line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Check of a condition of components of system of cooling

The wide spectrum of engine failures is connected with infringement of functioning of system of cooling. On the models equipped АТ, the given system provides also cooling ATF, supporting thereby optimum conditions for transmission work.

Check of a condition of components of system of cooling should be made after full cooling of the power unit (not less than in three hours after an engine stop).

Do not uncover at all a jellied mouth of a radiator at the hot engine!


 PERFORMANCE ORDER

1. Uncover a radiator for what at first turn it to the left to the first emphasis. If the hissing specifying in superfluous pressure in system is heard, wait its terminations, then press a cover a palm downwards and continue to turn to the left to an outright release. Carefully wash out a cover from within and outside of pure water. Also wash out a jellied mouth of a radiator. From cleared surfaces all traces of corrosion should be completely removed. The cooling liquid being in system should be concerning transparent. If the liquid is painted in colour of a rust, the system should be washed out and filled by a fresh mix (see Has undressed Service of system of cooling). If liquid level does not reach top, add in a radiator of a few mix of demanded structure (the Section Check of levels of liquids see).
2. Attentively examine top and bottom радиаторные hoses, and also hoses of system of heating of the salon, having smaller diameter and located between the power unit and a partition of an impellent compartment. Check hoses on all their length and in case of revealing of cracks, swellings and signs of ageing of a material make replacement of defective components (address to an accompanying illustration). Small cracks usually to make out at сжимании a hose easier. Without dependence from a condition it is necessary to change hoses approximately time in two years.
3. Check up reliability of fastening of all hoses on the unions/branch pipes. Leaks of a cooling liquid usually are shown in a kind потеков rusty or white colour on surfaces surrounding their source. If hoses are fixed on unions/branch pipes by collars of braided type, it will be reasonable to replace the last more reliable worm or screw.
4. By blowing off by the compressed air, or by means of a soft brush, remove from backlashes between plates of the heat exchanger of a radiator old leaves, remains of insects and other dust. Try not to damage soft plates of the heat exchanger and not to cut about their keen edges fingers.
5. Every second check, and also at first signs of infringement of functioning of system of cooling make check of a cover of a radiator by pressure. If near at hand there will be no suitable equipment, address for the help on a car repair shop.