Tojota Lend Kruzer, Amazon, Leksus LX470
+ Identification numbers of the car
+ Controls and receptions of safe operation of the car
- Options and car routine maintenance
Specifications
The routine maintenance schedule
The general data on options and adjustments
Check of levels of liquids
Check of a condition of tyres and pressure of their rating
Check of level of working liquid АТ
Check of level of a liquid of the hydraulic booster of a wheel
Replacement of impellent oil and the oil filter
Check, service and accumulator room gymnastics
Check of a condition of components of system of cooling
Check of a condition and replacement of the hoses located in an impellent compartment
Check of a condition and replacement of brushes of screen wipers
Rotation of wheels
Check of a condition of components of a suspension bracket and steering drive
Greasing of components of the chassis
Check of a condition of components of system of release of the fulfilled gases
Check of level of greasing in a distributing box
Check of level of greasing of differential
Check of a condition of seat belts
Check and adjustment of turns of idling
Check of a condition of protective covers of power shafts
Check and replacement of the valve of system of operated ventilation картера (PCV)
Replacement of a filtering element of an air cleaner
Condition check, adjustment of effort of a tension and replacement приводных belts
Check of a condition of components of the power supply system
Check of brake system
Adjustment of height of position and free wheeling of a pedal of a brake
Check of a condition and replacement of spark plugs (petrol engines)
Check and adjustment of backlashes of valves
Replacement of the fuel filter
Check and service of the conditioner of air (К/В)
Service of system of cooling
Condition check, stuffing by greasing and adjustment of forward naves and wheel bearings
Replacement ATF of automatic transmission and the main transfer
Replacement of greasing of a distributing box
Replacement of greasing of differential
Check of a condition of components of system of catching of fuel evaporations
Check of serviceability of a condition of components of system рециркуляции the fulfilled gases (EGR)
+ The engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ The power supply system and release of the fulfilled gases
+ Engine electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ Gear change box
+ Transmissionnaja line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Adjustment of height of position and free wheeling of a pedal of a brake
Height of position of a pedal
|
|
As height of position of a pedal is called the size of its removal колодки from a floor (address to an accompanying illustration). |
If the considered parametre falls outside the limits an admissible range (Specifications see), it is necessary to make corresponding adjustment (see further).
|
|
|
|
1. Before to start measurement of height of position of a pedal of a brake make sure that last is completely released, then start the engine and some times squeeze out a pedal of gas for the purpose of activation of the vacuum amplifier of brakes. Measure height of position of a pedal. In case of need make corresponding adjustment for what ослабьте a counternut and release a lock bolt/gauge-switch of stoplights, then ослабьте a counternut of a pusher and rotation of a rod of the last deduce pedal height on the middle of an admissible range (address to an accompanying illustration). Do not forget to tighten a counternut. |
2. Having finished pedal adjustment, screw a lock bolt/gauge-switch against the stop it in the lever of pedal assemblage (without a tightness). |
|
Pedal free wheeling
|
|
As pedal free wheeling is called the size of its moving from the top point to a point, in which there is a sensation of resistance to squeezing (address to an accompanying illustration), i.e. prior to the beginning of activation of a hydraulic drive of brake system. |
If the result of measurement falls outside the limits an admissible range, it is necessary to make corresponding updating (see further).
|
|
| Before measurement of size of a free wheeling of a pedal of a brake it is necessary to squeeze out it from half-dozen times at the muffled engine. Ослабьте a counternut also achieve demanded result rotation of a rod of a pusher. Tighten a counternut. |
|
|
|