Toyota Land Cruiser 100 / Amazon, Lexus LX 470

Since 1997 of release

Repair and car operation


Tojota Lend Kruzer, Amazon, Leksus LX470
+ Identification numbers of the car
+ Controls and receptions of safe operation of the car
- Options and car routine maintenance
   Specifications
   The routine maintenance schedule
   The general data on options and adjustments
   Check of levels of liquids
   Check of a condition of tyres and pressure of their rating
   Check of level of working liquid АТ
   Check of level of a liquid of the hydraulic booster of a wheel
   Replacement of impellent oil and the oil filter
   Check, service and accumulator room gymnastics
   Check of a condition of components of system of cooling
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition and replacement of brushes of screen wipers
   Rotation of wheels
   Check of a condition of components of a suspension bracket and steering drive
   Greasing of components of the chassis
   Check of a condition of components of system of release of the fulfilled gases
   Check of level of greasing in a distributing box
   Check of level of greasing of differential
   Check of a condition of seat belts
   Check and adjustment of turns of idling
   Check of a condition of protective covers of power shafts
   Check and replacement of the valve of system of operated ventilation картера (PCV)
   Replacement of a filtering element of an air cleaner
   Condition check, adjustment of effort of a tension and replacement приводных belts
   Check of a condition of components of the power supply system
   Check of brake system
   Adjustment of height of position and free wheeling of a pedal of a brake
   Check of a condition and replacement of spark plugs (petrol engines)
   Check and adjustment of backlashes of valves
   Replacement of the fuel filter
   Check and service of the conditioner of air (К/В)
   Service of system of cooling
   Condition check, stuffing by greasing and adjustment of forward naves and wheel bearings
   Replacement ATF of automatic transmission and the main transfer
   Replacement of greasing of a distributing box
   Replacement of greasing of differential
   Check of a condition of components of system of catching of fuel evaporations
   Check of serviceability of a condition of components of system рециркуляции the fulfilled gases (EGR)
+ The engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ The power supply system and release of the fulfilled gases
+ Engine electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ Gear change box
+ Transmissionnaja line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Replacement ATF of automatic transmission and the main transfer

Replacement ATF should be made on a regular basis, according to the schedule of routine maintenance of the car (see Has undressed the routine maintenance Schedule). As трансмиссионная the liquid remains hot still long time after trip end before to start procedure performance, wait full cooling of the engine.

 PERFORMANCE ORDER

1. Prepare fresh трансмиссионную a liquid of a corresponding grade (Specifications in the beginning of the Head see).
2. Number of other necessary performance for forthcoming procedure of tools and materials concern: тележечный a jack, props for car fixing in the lifted position, drain capacity in volume not less than 7.6 l and a stock of rags and old newspapers.
3. Park the car on an equal horizontal platform with a firm covering, поддомкратьте it and establish on props, having provided an easy approach to a drain stopper of the pallet картера transmissions.
4. Get under the pallet drain capacity and all necessary stock. Try not to touch to located under with the car bottom разогретым to components of the power unit and system of release of the fulfilled gases. Having placed properly reception container, turn out a drain stopper (address to an accompanying illustration). When вытекание liquids completely will stop, wipe a drain stopper, screw it on the regular place and strongly tighten.
5. At a corresponding complete set of the car remove protection картера transmissions, then turn out located on pallet perimetre fixing bolts.
6. A hammer with soft brisk it is accurate обстучите the pallet for the purpose of destruction of a layer of landing hermetic (address to an accompanying illustration).

In order to avoid damage of interfaced surfaces do not try to hook the pallet the lever.

7. Lower the pallet and merge from it rests ATF.
8. Turn out fixing screws (address to an accompanying illustration) and remove filter ATF from the case клапанной assemblages.
9. Carefully examine internal surfaces of the pallet, estimate a condition of a filtering element and merged ATF. In the course of use трансмиссионная the liquid can change the originally bright red colour on dark red and even brown, and also get a smell of burning, – such changes usually testify transmission overheats while in service the car. At detection in a liquid, the pallet or the filter of metal sawdust, or particles of a frictional material it is necessary to check up a condition of internal components АТ or the rotation converter. For gathering of metal sawdust magnets at which removal it is necessary to remember their arrangement are provided, – in case of their wrong installation the pallet will not close densely (address to an accompanying illustration). In case of absence of confidence at definition of a condition of a liquid or the filter, address to experts of car-care centre.
10. Wash out the pallet solvent and, whenever possible, dry its compressed air. A scraper remove from interfaced surfaces of the pallet, картера and cases клапанной assemblages traces of a material of old linings.

Try not to damage an interfaced surface of the case made of an easy aluminium alloy клапанной assemblages.

Having replaced linings (address to an accompanying illustration), establish new filter ATF.
11. Make sure of absoluteness of cleanliness and dryness of an interfaced surface of the pallet and impose on it a pillow of hermetic Three Bond 1281 or similar (address to an accompanying illustration). Put on a branch pipe of a jellied mouth directing tube measuring щупа and press the pallet to картеру transmissions. Moving on pallet perimetre, in stages tighten fixing bolts with demanded effort.
12. Lower the car on the earth and through a jellied mouth fill in ATF a demanded grade in transmission (the Section Check of level of working liquid АТ see).
13. Translate transmission in position «Р», cock a lay brake and start the engine.
14. Serially translate selector AT lever through all positions, in summary having returned it in position «Р». Check up level ATF, in case of need make corresponding updating, having finished level of a liquid to a correct mark in an edge measuring щупа.
15. Within first several days of operation of the car look under the car, checking transmission on presence of signs of development of leaks. Once again check up level ATF, in case of need make updating (the Section Check of level of working liquid АТ see).