Toyota Land Cruiser 100 / Amazon, Lexus LX 470

Since 1997 of release

Repair and car operation

Tojota Lend Kruzer, Amazon, Leksus LX470
+ Identification numbers of the car
+ Controls and receptions of safe operation of the car
- Options and car routine maintenance
   The routine maintenance schedule
   The general data on options and adjustments
   Check of levels of liquids
   Check of a condition of tyres and pressure of their rating
   Check of level of working liquid АТ
   Check of level of a liquid of the hydraulic booster of a wheel
   Replacement of impellent oil and the oil filter
   Check, service and accumulator room gymnastics
   Check of a condition of components of system of cooling
   Check of a condition and replacement of the hoses located in an impellent compartment
   Check of a condition and replacement of brushes of screen wipers
   Rotation of wheels
   Check of a condition of components of a suspension bracket and steering drive
   Greasing of components of the chassis
   Check of a condition of components of system of release of the fulfilled gases
   Check of level of greasing in a distributing box
   Check of level of greasing of differential
   Check of a condition of seat belts
   Check and adjustment of turns of idling
   Check of a condition of protective covers of power shafts
   Check and replacement of the valve of system of operated ventilation картера (PCV)
   Replacement of a filtering element of an air cleaner
   Condition check, adjustment of effort of a tension and replacement приводных belts
   Check of a condition of components of the power supply system
   Check of brake system
   Adjustment of height of position and free wheeling of a pedal of a brake
   Check of a condition and replacement of spark plugs (petrol engines)
   Check and adjustment of backlashes of valves
   Replacement of the fuel filter
   Check and service of the conditioner of air (К/В)
   Service of system of cooling
   Condition check, stuffing by greasing and adjustment of forward naves and wheel bearings
   Replacement ATF of automatic transmission and the main transfer
   Replacement of greasing of a distributing box
   Replacement of greasing of differential
   Check of a condition of components of system of catching of fuel evaporations
   Check of serviceability of a condition of components of system рециркуляции the fulfilled gases (EGR)
+ The engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ The power supply system and release of the fulfilled gases
+ Engine electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ Gear change box
+ Transmissionnaja line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Check of level of a liquid of the hydraulic booster of a wheel

In difference from the steering mechanism of usual type, in equipped the hydraulic booster реечной to transfer uses a working liquid which starts to require eventually replacement.

The site of the tank of liquid ГУР is shown on accompanying illustrations in Options and car routine maintenance. The tank is equipped by the screw cover which is turned off counter-clockwise.


1. Some times turn a steering wheel from an emphasis against the stop then establish forward wheels of the car in rectilinear position and to muffle the engine.
2. In order to avoid dirt hit in hydraulic system wipe a cover and a surface of the tank pure rags.
3. Rotating counter-clockwise, remove from the tank equipped measuring щупом a cover. To the touch estimate temperature moistening an edge щупа liquids.
4a. Carefully wipe an edge щупа pure неворсящейся rags, screw a cover into place, then again remove it and on щупу visually define level of a liquid which should be depending on weather conditions in limits of a corresponding range (address to an accompanying illustration).
4b. On some models level of a working liquid can be estimated through translucent walls of its tank (address to an accompanying illustration). Try not to suppose an exit of level of liquid ГУР for limits of the bottom border of an admissible range.
5. If necessary the liquid is added directly in the tank through a mouth of the last by means of a funnel. Use a working liquid only the recommended grade.
6. If necessity for updating of level of a liquid arises regularly and often, check up on presence of signs of leaks the steering pump, картер реечной transfers, and also all connecting lines of a hydraulic path of system GUR and them штуцерные connections.
7. At the idling engine remember level of a working liquid in a tank.
8. Stop the engine and check up distinction in levels of liquid ГУР at the working and stopped engine. If liquid level has considerably changed (more, than on 5 mm) it is necessary to pump over system GUR.