Tojota Lend Kruzer, Amazon, Leksus LX470
+ Identification numbers of the car
+ Controls and receptions of safe operation of the car
- Options and car routine maintenance
Specifications
The routine maintenance schedule
The general data on options and adjustments
Check of levels of liquids
Check of a condition of tyres and pressure of their rating
Check of level of working liquid АТ
Check of level of a liquid of the hydraulic booster of a wheel
Replacement of impellent oil and the oil filter
Check, service and accumulator room gymnastics
Check of a condition of components of system of cooling
Check of a condition and replacement of the hoses located in an impellent compartment
Check of a condition and replacement of brushes of screen wipers
Rotation of wheels
Check of a condition of components of a suspension bracket and steering drive
Greasing of components of the chassis
Check of a condition of components of system of release of the fulfilled gases
Check of level of greasing in a distributing box
Check of level of greasing of differential
Check of a condition of seat belts
Check and adjustment of turns of idling
Check of a condition of protective covers of power shafts
Check and replacement of the valve of system of operated ventilation картера (PCV)
Replacement of a filtering element of an air cleaner
Condition check, adjustment of effort of a tension and replacement приводных belts
Check of a condition of components of the power supply system
Check of brake system
Adjustment of height of position and free wheeling of a pedal of a brake
Check of a condition and replacement of spark plugs (petrol engines)
Check and adjustment of backlashes of valves
Replacement of the fuel filter
Check and service of the conditioner of air (К/В)
Service of system of cooling
Condition check, stuffing by greasing and adjustment of forward naves and wheel bearings
Replacement ATF of automatic transmission and the main transfer
Replacement of greasing of a distributing box
Replacement of greasing of differential
Check of a condition of components of system of catching of fuel evaporations
Check of serviceability of a condition of components of system рециркуляции the fulfilled gases (EGR)
+ The engine
+ Systems of cooling of the engine, salon and air conditioning heating
+ The power supply system and release of the fulfilled gases
+ Engine electric equipment
+ Control systems of the engine and decrease in toxicity of the fulfilled gases
+ Gear change box
+ Transmissionnaja line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Replacement of a filtering element of an air cleaner Replacement of a filtering element is made regularly according to the schedule of routine maintenance of the car. During operation of the car the filter condition should be checked often enough, in particular in the conditions of strongly dusty district.
|
|
1. Find an air cleaner in an impellent compartment (address to accompanying illustrations in Options and car routine maintenance).
|
|
2. Release spring clamps of fastening of a cover of an air cleaner (address to an accompanying illustration). Disconnect all procedures stirring to performance hoses and uncover, try not to admit falling in an air cleaner of extraneous subjects. |
|
|
3. Take filtering element and wipe internal walls of a casing pure rags (address to an accompanying illustration).
|
4. Visually estimate a condition of a filtering element, in case of strong pollution make replacement. Filter moderately hammered by a dust it is possible to blow compressed air (through a back surface).
|
|
At use of compressed air necessarily put on goggles! |
The filtering element made of a wax paper cannot be washed out with application of oils or solvents if to achieve satisfactory result by a purge it is not possible, make replacement.
|
|
In order to avoid premature deterioration of internal components of the engine and occurrence of flashes in a final path do not maintain the car with the taken air filter! |
5. Establish a replaceable filtering element, track correctness of its landing in a casing.
6. Plant into place a cover and fix its spring clamps.
7. Be convinced of density and correctness of installation of all components of an inlet path. |
|
|
|